page contents

Mass Loaded Vinyl

Mass Loaded Vinyl


Product Description

*No warehouse fees charged on Mass Loaded Vinyl!  Save on costs! Call for discounted shipping rate quotes on this product 415-516-0064

Roll of Mass Loaded Vinyl

1 lb./sq. ft. – 48″ x 25′.

1/8 thick per lbs thickness

MLV is a heavy flexible soundproofing vinyl used in home and office soundproofing installations.

Designed to absorb sound waves and block air-borne noise, mass loaded vinyl has a dense heavy structure weighing 1 pound per square foot.  An economical and popular soundproofing solution among home soundproofing contractors and do-it-yourself’ers.

Tips and Suggestions:

Soundproofing a Wall
Mass loaded vinyl is most effective when used as part of a full soundproofing design whether it be for a soundproof wall, ceiling, or an entire home or office soundproofing remodel. Mass Loaded Vinyl is incorporated into soundproof wall designs to block outside noise from coming in or contain inside noise for privacy. Drywall is used to cover mass loaded vinyl using furring hat channels so it can resonate with the sound waves and absorb them.

Easy Soundproof Barrier Curtain
Use strong grommets to hang mass loaded vinyl underneath a decorative wall covering.

Auto Soundproofing
Mass loaded vinyl is used in auto soundproofing applications because of its flexible yet dense noise abatement design. It can be placed within car doors to control sound from audio system speakers or underneath the carpet to soundproof your auto floor or trunk.

More about mass loaded vinyl
Our soundproofing vinyl noise barrier will not shrink, rot or cause metal corrision and also features a strong resistance to adverse environmental conditions, oils, weak acids, and alkalais. May be combined with acoustical foams, glass fiber insulation wool to provide lightweight, efficient composites with high transmission losses over a broad frequency range.

The reduction of airborne noise and mass properties exhibited by our vinyl soundproofing barrier are attained without the use of hazardous lead or heavy metals.



Roll size by Density:

1 lb./sq. ft. – 48″ x 25′.
1/8 thick per lbs thickness
Each roll will cover 100 sq.ft. Rolls weigh approximately 109 lbs. / ea.


*per ASTM E-90

Noise Transmission Loss (dB) / Frequency (Hz)

Hz 125 250 500 1000 2000 4000 STC

dB 16 17 22 27 31 36 26

Typical Physical Properties of our Noise Barrier

Weight 1 lbs. / sq. ft.

Tensile Strength 2,750 KPa (400 psi)

Tear Strength 12.5 Kg/cm (70 lbs./in.)

Flammability SE “0” in/min.

Temperature Range -40 F – 180 F
She was looking for the interview to be casual and conversational.

Additional Information

Weight 1 lbs
Dimensions 48 x 12 x 12 in